Meet the needs of conventional packaging or special packaging. Automated packaging solutions can significantly shorten the packaging process and maximize the use of labor.
FAQ1 sealing machine sealing line maintenance method
Demolition method
1. Turn off the power of the machine
2. With cardboard to seal the seat		 3. Loosen the terminals on both sides to keep the red guard 4. Press both sides of the terminal plate pressure plate 90 degrees can not exceed (to avoid breaking)
5. Remove the hotline fixed screw face (left and right) 6. Remove the electric heater  
   
The method of loading
1. Cut the end of the seal line into 90 degrees
2. Insert the sealing line from the left side of the machine into the heat sink		 3. The terminal plate must be 90 degrees 4. Lock the 90-degree terminal and seal line into the terminal block (both sides are locked)
5. Push the terminal base plate back 6. Tighten the terminal back to lock (both sides are locked)  
 

FAQ2 Bicycle Sealer Installation
1. Unboxing 2. Remove all objects 3. (1) See if all objects are short 3. (2) as shown in the figure to see if all objects are short
4. Fix the column 5. Fix the host 6. Note that the screw is easy to slip teeth 7. Cut the fixed rope
8. The spring is hooked 9. Combine the pedal with the connecting rod 10. (1) lock the work board 10. (2) lock the work board
10. (3) lock the work board 10. (4) lock the work board 11. 12.
13. 14. 15. 16.
 

FAQ3 Fully automatic baler installed with PP step
1. 2. 3. 4.
5. 6. 7. 8.
9. 10. 11. 12.
13. 14. 15. 16.
17. 18. 19. 20.
twenty one.